KTM 1190 / 1290 Adventure(R) / Duke 18,600 Mile Service

KTM 1190 / 1290 Adventure(R) / Duke 18,600 Mile Service
Elite Motorsports
1400 E Eisenhower Blvd
Loveland, CO

Service Description

Performing regular service at the factory recommended service intervals is critical to ensuring the long-term reliability of your motorcycle. This small investment will allow our technicians to inspect your bike for any potential warning signs and improper adjustment before it leads to costly repairs.

18,600 Mile / Annual Service

  • 8-Hours @ $104.00 per hour

1190 / 1290 Adventure(R) Duke (18,600 MILES)

  • Read out the trouble code memory using the KTM diagnostics tool.
  • Check the fuel pressure.
  • Check the functioning of the electrical equipment.
  • Change the engine oil and oil filter and clean the oil screens.
  • Check the brake discs.
  • Check the front brake linings.
  • Check the rear brake linings
  • Check the spoke tension.
  • Check the rim run-out.
  • Check the tire condition.
  • Check the tire air pressure.
  • Check the rear brake fluid level.
  • Check the shock absorber and fork for leaks. Perform a fork service and shock absorber service as needed and depending on how the vehicle will be used.
  • Clean the dust boots of the fork legs.
  • Check the chain, rear sprocket and engine sprocket.
  • Check the chain tension.
  • Check the brake lines for damage and leakage.
  • Check the brake fluid level of the front brake.
  • Check the coolant level in the compensating tank.
  • Check that the radiator fan is functioning properly.
  • Change the air filter. Clean the air filter box.
  • Check the cables for damage and routing without sharp bends. (fuel tank removed)
  • Change the spark plugs. (air filter removed)
  • Check the valve clearance. (air filter and spark plugs removed)
  • Change the secondary air system membranes.
  • Check the steering head bearing play.
  • Check the headlight setting.
  • Final check: Check the vehicle for roadworthiness and take a test ride.
  • Read out the error memory after the test ride using the KTM diagnostics tool.
  • Check the CO adjustment with the KTM diagnostics tool.
  • Reset the service interval display.
  • Make the service entry in the KTM Dealer.net and in the Service and Warranty Booklet.